Menu

FAQ

Product Detail

CITCABLE: 200000Gy Radiation Resistant Single-mode Fibre
  Characteristics: Suitable for use in harsh environments, up to 10Gbits/s, Tight and semi-loose cables, EASY TERMINATION
Temperature Range:  -196°C to +260°C  and short time 300°C     
 Applications
  • Aerospace
  • Atomic energy
  • Medical
  • Oil/gas
  • Scientific research
Characteristics
  • Low dispersion and low attenuation
  • Superior mechanical protection and excellent stripping performance
  • Outstanding uniformity and geometry control
  • Low radiation loss
$0 -$0.65 /Piece | 1000 Pieces (Min.Order)

   CITCABLE radiation resistant sigle-mode fibres are developed by adjusting the composition of optical fibre and improving the process technology to meet the special application requirements of the fibre in the radiation environment. The optical properties are optimized at 1310nm and 1550nm oprerating wavelenghth. Low attenuation and low dispersion can be achieved.
According to Standard
TIA/EIA 455-64 (dB/100m)		 1310 Total dose 50Krad
dose rate 0.1rad/s(25℃）
induced attenuation		 -- ≤ 0.3 ≤ 0.3
1310, 1550 Total dose 2000Gy
dose rate 0.5Gy/s(25℃）
induced attenuation		 ≤ 0.9 ≤ 0.8 ≤ 0.8
1310, 1550 Total dose 200000Gy
dose rate 0.5Gy/s(25℃）
induced attenuation		 ≤ 2.5 ≤ 2.0 ≤ 2.0
Single-Mode Polyimide and PEEK
   Single-Mode (SM) fibers with polyimide primary and PEEK secondary coatings are specifically designed for use in harsh environments where bare fiber fails. The fibers target distributed sensing applications requiring chemical, abrasion, and radiation resistance. Excellent for the following applications: pipeline monitoring, structural monitoring, embedded sensor, flexible risers, geotechnical risk monitoring, fracking micro-seismic sensors, enhanced oil recovery (EOR), haptic feedback, and biomedical in vivo sensors.

SMFF（Single Mode Fluoride Fiber）
SMFF（Single Mode Fluoride Fiber）
MMFF(Multi Mode Fluoride Fiber)
DCFF（Double Cladding Fluoride Fiber）

Related Products

High Temperature Radio-Resistant fibers Cable

CITCABLE:High Temperature Radio-Resistant fibers Cable
PEEK Reinforced Optical Fiber cable/Single-Mode Polyimide and PEEK use in a containment area
Characteristics: Suitable for use in harsh environments, up to 10Gbits/s, Tight and semi-loose cables, EASY TERMINATION
Temperature Range: -65°C to +200°C Fluoropolymer
                                  -196°C to +260°C  TPI/PEEK
Jacket: Fluoropolymer/PEEK/TPI

Manufactured from polymers such as PEEK, PTFE, PFA, ETFE, PVDF, and FEP, these products deliver innovative fiber optic solutions for a range of industries and applications:

  • Aerospace

  • Telecoms

  • Medical

  • Automotive

  • Energy

  • Nuclear

>

Radiation resistant fibers cable

CITCABLE:Radiation resistant fibers cable
Characteristics: Suitable for use in harsh environments, up to 10Gbits/s, Tight and semi-loose cables, EASY TERMINATION
Temperature Range:      -196°C to +260°C     

Radiation-resistance Characteristcics
According to Standard
TIA/EIA 455-64 (dB/100m)		 1310 Total dose 50Krad
dose rate 0.1rad/s(25℃）
induced attenuation		 -- ≤ 0.3 ≤ 0.3
1310, 1550 Total dose 2000Gy
dose rate 0.5Gy/s(25℃）
induced attenuation		 ≤ 0.9 ≤ 0.8 ≤ 0.8
1310, 1550 Total dose 200000Gy
dose rate 0.5Gy/s(25℃）
induced attenuation		 ≤ 2.5 ≤ 2.0 ≤ 2.0

Manufactured from polymers such as PEEK, PTFE, PFA, ETFE, PVDF, and FEP, these products deliver innovative fiber optic solutions for a range of industries and applications:

  • Aerospace

  • Telecoms

  • Medical

  • Automotive

  • Energy

  • Nuclear

>

PEEK Reinforced Optical Fiber cable

 CITCABLE: PEEK Reinforced Optical Fiber cable/Single-Mode Polyimide and PEEK
Characteristics: Suitable for use in harsh environments, up to 10Gbits/s, Tight and semi-loose cables, EASY TERMINATION
Temperature Range: -65°C to +200°C Fluoropolymer
                                  -196°C to +260°C  TPI/PEEK
Jacket: Fluoropolymer/PEEK/TPI

Manufactured from polymers such as PEEK, PTFE, PFA, ETFE, PVDF, and FEP, these products deliver innovative fiber optic solutions for a range of industries and applications:

  • Aerospace

  • Telecoms

  • Medical

  • Automotive

  • Energy

  • Nuclear

>

200000Gy Radiation Resistant Single-mode Fibre cable

CITCABLE: 200000Gy Radiation Resistant Single-mode Fibre
  Characteristics: Suitable for use in harsh environments, up to 10Gbits/s, Tight and semi-loose cables, EASY TERMINATION
Temperature Range:  -196°C to +260°C  and short time 300°C     
 Applications

  • Aerospace
  • Atomic energy
  • Medical
  • Oil/gas
  • Scientific research
Characteristics
  • Low dispersion and low attenuation
  • Superior mechanical protection and excellent stripping performance
  • Outstanding uniformity and geometry control
  • Low radiation loss
>

Ultra-thin PEEK Optical Fibre cable

CITCABLE:  Ultra-thin PEEK Optical Fibre cable
Temperature Range:   -196°C to +260°C, short 300°C
   it's meeting the special application requirements of the optical fibre in the radiation environment, the multi-mode fibre with radiation resistance is developed by adjusting the optical fibre components and improving the process technology. This fibre has graded refractive index profile, which fully optimizes the waveguide characteristics of 850nm & 1300nm operating wavelength, and has very low attenuation and high bandwidth. CITCABLE radiation resistant multi-mode fibres have 50μm core, Besides, CITCABLE also can make customized tight-buffered radiation resistant multi-mode fibre

  • Customer colors are available through minimum order.
  • Customized: CITCABLE can provide different tight buffered materials, such as ETFE, PFA, PEEK, TPI
>

Super fine peek Single-mode Fibre wire cable

CITCABLE:  Super fine peek  Single-mode Fibre wire cable
Temperature Range:   -196°C to +260°C, short 300°C
   1,0.125 Single-mode Fibre with coating
    2,PEEK OD:0.40MM

   it's meeting the special application requirements of the optical fibre in the radiation environment, the multi-mode fibre with radiation resistance is developed by adjusting the optical fibre components and improving the process technology. This fibre has graded refractive index profile, which fully optimizes the waveguide characteristics of 850nm & 1300nm operating wavelength, and has very low attenuation and high bandwidth. CITCABLE radiation resistant multi-mode fibres have 50μm core, Besides, CITCABLE also can make customized tight-buffered radiation resistant multi-mode fibre

  • Customer colors are available through minimum order.
  • Customized: CITCABLE can provide different tight buffered materials, such as ETFE, PFA, PEEK, TPI
>

High Temperature Radio-Resistant fibers Cable

CITCABLE: High Temperature Radio-Resistant fibers Cable
  Characteristics: Suitable for use in harsh environments, up to 10Gbits/s, Tight and semi-loose cables, EASY TERMINATION
Temperature Range:  -196°C to +260°C  and short time 300°C     
 Applications

  • Aerospace
  • Atomic energy
  • Medical
  • Oil/gas
  • Scientific research
Characteristics
  • Low dispersion and low attenuation
  • Superior mechanical protection and excellent stripping performance
  • Outstanding uniformity and geometry control
  • Low radiation loss
>

High Radiation Absorbed dose rate Optical Fibre Cable

   CITCABLE:  High Radiation Absorbed dose rate Optical Fibre Cable
  Characteristics: Suitable for use in harsh environments, up to 10Gbits/s, Tight and semi-loose cables, EASY TERMINATION
Temperature Range:  -196°C to +260°C  and short time 300°C     
 Applications

  • Aerospace
  • Atomic energy
  • Medical
  • Oil/gas
  • Scientific research
Characteristics
  • Low dispersion and low attenuation
  • Superior mechanical protection and excellent stripping performance
  • Outstanding uniformity and geometry control
  • Low radiation loss
>