Name: 200000Gy Radiation Resistant Single-mode Fibre cable
Rating: 4.7 (52 reviews)

CITCABLE: 200000Gy Radiation Resistant Single-mode Fibre
Characteristics: Suitable for use in harsh environments, up to 10Gbits/s, Tight and semi-loose cables, EASY TERMINATION
Temperature Range: -196°C to +260°C and short time 300°C
Applications

Aerospace
Atomic energy
Medical
Oil/gas
Scientific research

Characteristics

Low dispersion and low attenuation
Superior mechanical protection and excellent stripping performance
Outstanding uniformity and geometry control
Low radiation loss

200000Gy Radiation Resistant Single-mode Fibre cable

CITCABLE radiation resistant sigle-mode fibres are developed by adjusting the composition of optical fibre and improving the process technology to meet the special application requirements of the fibre in the radiation environment. The optical properties are optimized at 1310nm and 1550nm oprerating wavelenghth. Low attenuation and low dispersion can be achieved.

According to Standard TIA/EIA 455-64 (dB/100m)	1310	Total dose 50Krad dose rate 0.1rad/s(25℃） induced attenuation	--	≤ 0.3	≤ 0.3
	1310, 1550	Total dose 2000Gy dose rate 0.5Gy/s(25℃） induced attenuation	≤ 0.9	≤ 0.8	≤ 0.8
	1310, 1550	Total dose 200000Gy dose rate 0.5Gy/s(25℃） induced attenuation	≤ 2.5	≤ 2.0	≤ 2.0

Single-Mode Polyimide and PEEK
Single-Mode (SM) fibers with polyimide primary and PEEK secondary coatings are specifically designed for use in harsh environments where bare fiber fails. The fibers target distributed sensing applications requiring chemical, abrasion, and radiation resistance. Excellent for the following applications: pipeline monitoring, structural monitoring, embedded sensor, flexible risers, geotechnical risk monitoring, fracking micro-seismic sensors, enhanced oil recovery (EOR), haptic feedback, and biomedical in vivo sensors.

SMFF（Single Mode Fluoride Fiber）
SMFF（Single Mode Fluoride Fiber）
MMFF(Multi Mode Fluoride Fiber)
DCFF（Double Cladding Fluoride Fiber）

Related Products

Contact Us X