bannière
Maison

-160 °C à +240 °C pour TPI

Nouveaux produits

-160 °C à +240 °C pour TPI

  • Double PI Litz wire Cable FOR Solid-state transformer 20KV
    CITCABLE:Double PI Litz wire Cable FOR Solid-state transformer 20KV Litz ETFE/PI Insulated 13000*0.05mm magnetic wire FOR Solid-state transformer 10KV TPI Litz 29000*0.05  Multicore Magnetic wire CITCABLE provides professional  The PI high-temperature extrusion production line directly melts high-purity PI resin and wraps the conductor as a whole, completely overcoming the inherent pain points of traditional wrapping and sintering processes: 1. Seamless and complete insulation layer Eliminate overlapping gaps and eliminate potential hazards of partial discharge from the source; 2. High concentricity and uniform wall thickness The thickness of the insulation layer is stable and controllable, and the electrical performance is highly consistent; 3. The surface of the cable is smooth and wrinkle free Reduce the resistance of threading and wiring assembly, and adapt to narrow space wiring.   In aerospace, quantum computing, and semiconductor equipment scenarios, cables are often in extreme operating conditions that cannot be stopped or maintained. The advantages brought by melt extruded PI cables are not only miniaturization and lightweight, but also the safety margin for the long-term stable operation of the entire system. The seamless insulation structure eliminates the root cause of air gap partial discharge, effectively extends the service life of cables, and avoids significant losses caused by equipment shutdown and load scrapping due to cable failure.   The upper limit of reliability for special cables is determined by iterative manufacturing processes. Only by selecting PI cables and understanding the differences in manufacturing processes can one truly choose the right product that is suitable for the project.   CITCABLE provides professional Kapton (Polyimide) wire cables.Kapton  Insulated  Cable , This series of high-performance wires primarily utilizes bare, tinned, silver-plated, or nickel-plated copper, pure silver, and specialized alloys as core conductors, which are then insulated with high-performance coatings such as specialized Polyimide (Kapton/PI).  CITCable extrudes all types of  PEEK,PEI, Polyimide ,TPI,PI,FEP,PFA,PTFE,ETFE,PVDF,Viton/FKM/FPM, SILICONE and Wrap PI,PTFE,others, CITCABLE can accommodate large power cables as well as miniature control cables. Radiation resistance combined with high or low temperatures, extreme mechanical stress, and miniaturisation, in standard or inert atmosphere。 We provide fluid resistant atf oil and gas cable products. If you are interested in fluid resistant atf oil and gas cable, please contact us and initiate a consultation for more information. Features 1, Excellent mechanical properties and chemical resistance.2, Outstanding and Excellent resistance at high temperature to engine fluids3, High tear and tensile strength damping characteristic.4, Hot Oil Resistant Thin-Wall 200 ℃ , 240℃  5, High performance PEEK,TPI,PEI,Teflon, Silicone,fluoropolymer /Viton/FKM /FPM outer, Jacket6, High Temperature, High Performance
    EN SAVOIR PLUS
  • PEEK Litz Wire 14000*0.05mm magnetic wire For SST
    CITCABLE:PEEK Litz Wire 14000*0.05mm magnetic wire For SST Litz ETFE 29000*0.05mm magnetic wire For SST Litz ETFE/PI Insulated 13000*0.05mm magnetic wire FOR Solid-state transformer 10KV TPI Litz 29000*0.05  Multicore Magnetic wire CITCABLE provides professional  The PI high-temperature extrusion production line directly melts high-purity PI/PEEK/ETFE resin and wraps the conductor as a whole, completely overcoming the inherent pain points of traditional wrapping and sintering processes: 1. Seamless and complete insulation layer Eliminate overlapping gaps and eliminate potential hazards of partial discharge from the source; 2. High concentricity and uniform wall thickness The thickness of the insulation layer is stable and controllable, and the electrical performance is highly consistent; 3. The surface of the cable is smooth and wrinkle free Reduce the resistance of threading and wiring assembly, and adapt to narrow space wiring.   In aerospace, quantum computing, and semiconductor equipment scenarios, cables are often in extreme operating conditions that cannot be stopped or maintained. The advantages brought by melt extruded PI cables are not only miniaturization and lightweight, but also the safety margin for the long-term stable operation of the entire system. The seamless insulation structure eliminates the root cause of air gap partial discharge, effectively extends the service life of cables, and avoids significant losses caused by equipment shutdown and load scrapping due to cable failure.   The upper limit of reliability for special cables is determined by iterative manufacturing processes. Only by selecting PI cables and understanding the differences in manufacturing processes can one truly choose the right product that is suitable for the project.   CITCABLE provides professional Kapton (Polyimide) wire cables.Kapton  Insulated  Cable , This series of high-performance wires primarily utilizes bare, tinned, silver-plated, or nickel-plated copper, pure silver, and specialized alloys as core conductors, which are then insulated with high-performance coatings such as specialized Polyimide (Kapton/PI).  CITCable extrudes all types of  PEEK,PEI, Polyimide ,TPI,PI,FEP,PFA,PTFE,ETFE,PVDF,Viton/FKM/FPM, SILICONE and Wrap PI,PTFE,others, CITCABLE can accommodate large power cables as well as miniature control cables. Radiation resistance combined with high or low temperatures, extreme mechanical stress, and miniaturisation, in standard or inert atmosphere。 We provide fluid resistant atf oil and gas cable products. If you are interested in fluid resistant atf oil and gas cable, please contact us and initiate a consultation for more information. Features 1, Excellent mechanical properties and chemical resistance.2, Outstanding and Excellent resistance at high temperature to engine fluids3, High tear and tensile strength damping characteristic.4, Hot Oil Resistant Thin-Wall 200 ℃ , 240℃  5, High performance PEEK,TPI,PEI,Teflon, Silicone,fluoropolymer /Viton/FKM /FPM outer, Jacket6, High Temperature, High Performance
    EN SAVOIR PLUS
  • Litz ETFE 29000*0.05mm magnetic wire For SST
    CITCABLE:Litz ETFE 29000*0.05mm magnetic wire For SST Litz ETFE/PI Insulated 13000*0.05mm magnetic wire FOR Solid-state transformer 10KV TPI Litz 29000*0.05  Multicore Magnetic wire CITCABLE provides professional  The PI high-temperature extrusion production line directly melts high-purity PI resin and wraps the conductor as a whole, completely overcoming the inherent pain points of traditional wrapping and sintering processes: 1. Seamless and complete insulation layer Eliminate overlapping gaps and eliminate potential hazards of partial discharge from the source; 2. High concentricity and uniform wall thickness The thickness of the insulation layer is stable and controllable, and the electrical performance is highly consistent; 3. The surface of the cable is smooth and wrinkle free Reduce the resistance of threading and wiring assembly, and adapt to narrow space wiring.   In aerospace, quantum computing, and semiconductor equipment scenarios, cables are often in extreme operating conditions that cannot be stopped or maintained. The advantages brought by melt extruded PI cables are not only miniaturization and lightweight, but also the safety margin for the long-term stable operation of the entire system. The seamless insulation structure eliminates the root cause of air gap partial discharge, effectively extends the service life of cables, and avoids significant losses caused by equipment shutdown and load scrapping due to cable failure.   The upper limit of reliability for special cables is determined by iterative manufacturing processes. Only by selecting PI cables and understanding the differences in manufacturing processes can one truly choose the right product that is suitable for the project.   CITCABLE provides professional Kapton (Polyimide) wire cables.Kapton  Insulated  Cable , This series of high-performance wires primarily utilizes bare, tinned, silver-plated, or nickel-plated copper, pure silver, and specialized alloys as core conductors, which are then insulated with high-performance coatings such as specialized Polyimide (Kapton/PI).  CITCable extrudes all types of  PEEK,PEI, Polyimide ,TPI,PI,FEP,PFA,PTFE,ETFE,PVDF,Viton/FKM/FPM, SILICONE and Wrap PI,PTFE,others, CITCABLE can accommodate large power cables as well as miniature control cables. Radiation resistance combined with high or low temperatures, extreme mechanical stress, and miniaturisation, in standard or inert atmosphere。 We provide fluid resistant atf oil and gas cable products. If you are interested in fluid resistant atf oil and gas cable, please contact us and initiate a consultation for more information. Features 1, Excellent mechanical properties and chemical resistance.2, Outstanding and Excellent resistance at high temperature to engine fluids3, High tear and tensile strength damping characteristic.4, Hot Oil Resistant Thin-Wall 200 ℃ , 240℃  5, High performance PEEK,TPI,PEI,Teflon, Silicone,fluoropolymer /Viton/FKM /FPM outer, Jacket6, High Temperature, High Performance
    EN SAVOIR PLUS
  • Litz TPI 13000*0.05mm magnetic wire FOR Solid-state transformer 10KV
    CITCABLE: Litz ETFE/PI Insulated 13000*0.05mm magnetic wire FOR Solid-state transformer 10KV TPI Litz 29000*0.05  Multicore Magnetic wire CITCABLE provides professional  The PI high-temperature extrusion production line directly melts high-purity PI resin and wraps the conductor as a whole, completely overcoming the inherent pain points of traditional wrapping and sintering processes: 1. Seamless and complete insulation layer Eliminate overlapping gaps and eliminate potential hazards of partial discharge from the source; 2. High concentricity and uniform wall thickness The thickness of the insulation layer is stable and controllable, and the electrical performance is highly consistent; 3. The surface of the cable is smooth and wrinkle free Reduce the resistance of threading and wiring assembly, and adapt to narrow space wiring.   In aerospace, quantum computing, and semiconductor equipment scenarios, cables are often in extreme operating conditions that cannot be stopped or maintained. The advantages brought by melt extruded PI cables are not only miniaturization and lightweight, but also the safety margin for the long-term stable operation of the entire system. The seamless insulation structure eliminates the root cause of air gap partial discharge, effectively extends the service life of cables, and avoids significant losses caused by equipment shutdown and load scrapping due to cable failure.   The upper limit of reliability for special cables is determined by iterative manufacturing processes. Only by selecting PI cables and understanding the differences in manufacturing processes can one truly choose the right product that is suitable for the project.   CITCABLE provides professional Kapton (Polyimide) wire cables.Kapton  Insulated  Cable , This series of high-performance wires primarily utilizes bare, tinned, silver-plated, or nickel-plated copper, pure silver, and specialized alloys as core conductors, which are then insulated with high-performance coatings such as specialized Polyimide (Kapton/PI).  CITCable extrudes all types of  PEEK,PEI, Polyimide ,TPI,PI,FEP,PFA,PTFE,ETFE,PVDF,Viton/FKM/FPM, SILICONE and Wrap PI,PTFE,others, CITCABLE can accommodate large power cables as well as miniature control cables. Radiation resistance combined with high or low temperatures, extreme mechanical stress, and miniaturisation, in standard or inert atmosphere。 We provide fluid resistant atf oil and gas cable products. If you are interested in fluid resistant atf oil and gas cable, please contact us and initiate a consultation for more information. Features 1, Excellent mechanical properties and chemical resistance.2, Outstanding and Excellent resistance at high temperature to engine fluids3, High tear and tensile strength damping characteristic.4, Hot Oil Resistant Thin-Wall 200 ℃ , 240℃  5, High performance PEEK,TPI,PEI,Teflon, Silicone,fluoropolymer /Viton/FKM /FPM outer, Jacket6, High Temperature, High Performance
    EN SAVOIR PLUS
  • Câble Kapton plat en polyimide
    CITCABLE fournit des câbles professionnels en Kapton (polyimide).Câble Kapton plat en polyimideCette série de fils haute performance utilise principalement du cuivre nu, étamé, argenté ou nickelé, de l'argent pur et des alliages spécialisés comme conducteurs de base, qui sont ensuite isolés avec des revêtements haute performance tels que le polyimide spécialisé (Kapton/PI).CITCable extrude tous types de PEEK, PEI, polyimide, TPI, PI, FEP, PFA, PTFE, ETFE, PVDF, Viton/FKM/FPM, silicone et réalise des enroulements de PI, PTFE et autres. CITCable peut traiter aussi bien les câbles d'alimentation de grande section que les câbles de commande miniatures. Résistance aux radiations, aux hautes et basses températures, aux contraintes mécaniques extrêmes et à la miniaturisation, sous atmosphère standard ou inerte.Nous proposons des câbles ATF résistants aux fluides, notamment pour l'huile et le gaz. Si vous êtes intéressé par ce type de câbles, n'hésitez pas à nous contacter pour une consultation et obtenir plus d'informations. Caractéristiques 1. Excellentes propriétés mécaniques et résistance chimique.2. Excellente résistance aux fluides moteur à haute température3. Caractéristique d'amortissement de la résistance élevée à la déchirure et à la traction.4. Paroi mince résistante à l'huile chaude 200 °C, 240 °C5. Revêtement extérieur haute performance en PEEK, TPI, PEI, Téflon, silicone, fluoropolymère/Viton/FKM/FPM6. Haute température, haute performance
    EN SAVOIR PLUS
  • Câbles en polyimide résistants à la chaleur
    CITCABLE fournit des câbles professionnels en Kapton (polyimide).Câble isolé KaptonCette série de fils haute performance utilise principalement du cuivre nu, étamé, argenté ou nickelé, de l'argent pur et des alliages spécialisés comme conducteurs de base, qui sont ensuite isolés avec des revêtements haute performance tels que le polyimide spécialisé (Kapton/PI).CITCable extrude tous types de PEEK, PEI, polyimide, TPI, PI, FEP, PFA, PTFE, ETFE, PVDF, Viton/FKM/FPM, silicone et réalise des enroulements de PI, PTFE et autres. CITCable peut traiter aussi bien les câbles d'alimentation de grande section que les câbles de commande miniatures. Résistance aux radiations, aux hautes et basses températures, aux contraintes mécaniques extrêmes et à la miniaturisation, sous atmosphère standard ou inerte.Nous proposons des câbles ATF résistants aux fluides, notamment pour l'huile et le gaz. Si vous êtes intéressé par ce type de câbles, n'hésitez pas à nous contacter pour une consultation et obtenir plus d'informations. Caractéristiques 1. Excellentes propriétés mécaniques et résistance chimique.2. Excellente résistance aux fluides moteur à haute température3. Caractéristique d'amortissement de la résistance élevée à la déchirure et à la traction.4. Paroi mince résistante à l'huile chaude 200 °C, 240 °C5. Revêtement extérieur haute performance en PEEK, TPI, PEI, Téflon, silicone, fluoropolymère/Viton/FKM/FPM6. Haute température, haute performance
    EN SAVOIR PLUS
  • Fil magnétique PEEK ou PI pour l'industrie pétrolière et gazière
    CITCABLE : PEEK/PI Fil magnétique pour l'industrie pétrolière et gazièreCITCable extrude tous types de PEEK, PEI et polyimide ,TPI,PI,FEP,PFA,PTFE,ETFE,PVDF,Viton/FKM/FPM, SILICONE et Wrap PI,PTFE,autres, CITCABLE peut accueillir des câbles d'alimentation de grande taille ainsi queCâbles de commande miniatures.résistance aux radiations combinés à des températures élevées ou basses, à des contraintes mécaniques extrêmes et à la miniaturisation, dans une atmosphère standard ou inerte.Nous proposons des câbles ATF résistants aux fluides, notamment pour l'huile et le gaz. Si vous êtes intéressé par ce type de câbles, n'hésitez pas à nous contacter pour une consultation et obtenir plus d'informations. Caractéristiques1. Excellentes propriétés mécaniques et résistance chimique.2. Excellente résistance aux fluides moteur à haute température3. Caractéristique d'amortissement de la résistance élevée à la déchirure et à la traction.4. Paroi mince résistante à l'huile chaude, 240 °C5. Revêtement extérieur haute performance en PEEK, TPI, PEI, Téflon, silicone, fluoropolymère/Viton/FKM/FPM6. Haute température, haute performance
    EN SAVOIR PLUS
  • Fil Kapton (polyimide) PI pour UHV
    CITCABLE fournit des câbles professionnels en Kapton (polyimide).Câble isolé KaptonCette série de fils haute performance utilise principalement du cuivre nu, étamé, argenté ou nickelé, de l'argent pur et des alliages spécialisés comme conducteurs de base, qui sont ensuite isolés avec des revêtements haute performance tels que le polyimide spécialisé (Kapton/PI).CITCable extrude tous types de PEEK, PEI, polyimide, TPI, PI, FEP, PFA, PTFE, ETFE, PVDF, Viton/FKM/FPM, silicone et réalise des enroulements de PI, PTFE et autres. CITCable peut traiter aussi bien les câbles d'alimentation de grande section que les câbles de commande miniatures. Résistance aux radiations, aux hautes et basses températures, aux contraintes mécaniques extrêmes et à la miniaturisation, sous atmosphère standard ou inerte.Nous proposons des câbles ATF résistants aux fluides, notamment pour l'huile et le gaz. Si vous êtes intéressé par ce type de câbles, n'hésitez pas à nous contacter pour une consultation et obtenir plus d'informations. Caractéristiques 1. Excellentes propriétés mécaniques et résistance chimique.2. Excellente résistance aux fluides moteur à haute température3. Caractéristique d'amortissement de la résistance élevée à la déchirure et à la traction.4. Paroi mince résistante à l'huile chaude 200 °C, 240 °C5. Revêtement extérieur haute performance en PEEK, TPI, PEI, Téflon, silicone, fluoropolymère/Viton/FKM/FPM6. Haute température, haute performance
    EN SAVOIR PLUS
  • Ablation par impulsion de champ électrique à ultra-haute tension avec fil torsadé Kapton
    CITCABLE fournit des câbles professionnels en Kapton (polyimide). Ablation par impulsion de champ électrique à très haute tension, fil torsadé PI,Fil de revêtement Kapton/PEEK en bronze hosphor Cette série de fils haute performance utilise principalement du cuivre nu, étamé, argenté ou nickelé, de l'argent pur et des alliages spécialisés comme conducteurs de base, qui sont ensuite isolés avec des revêtements haute performance tels que le polyimide spécialisé (Kapton/PI).CITCable extrude tous types de PEEK, PEI, polyimide, TPI, PI, FEP, PFA, PTFE, ETFE, PVDF, Viton/FKM/FPM, silicone et réalise des enroulements de PI, PTFE et autres. CITCable peut traiter aussi bien les câbles d'alimentation de grande section que les câbles de commande miniatures. Résistance aux radiations, aux hautes et basses températures, aux contraintes mécaniques extrêmes et à la miniaturisation, sous atmosphère standard ou inerte.Nous proposons des câbles ATF résistants aux fluides, notamment pour l'huile et le gaz. Si vous êtes intéressé par ce type de câbles, n'hésitez pas à nous contacter pour une consultation et obtenir plus d'informations. Caractéristiques 1. Excellentes propriétés mécaniques et résistance chimique.2. Excellente résistance aux fluides moteur à haute température3. Caractéristique d'amortissement de la résistance élevée à la déchirure et à la traction.4. Paroi mince résistante à l'huile chaude 200 °C, 240 °C5. Revêtement extérieur haute performance en PEEK, TPI, PEI, Téflon, silicone, fluoropolymère/Viton/FKM/FPM6. Haute température, haute performance
    EN SAVOIR PLUS
  • Capteur de basse température quatre couleurs en cuivre et bronze phosphoreux
    CITCABLE fournit des câbles professionnels en Kapton (polyimide). Fil de revêtement Kapton/PEEK en bronze hosphor Cette série de fils haute performance utilise principalement du cuivre nu, étamé, argenté ou nickelé, de l'argent pur et des alliages spécialisés comme conducteurs de base, qui sont ensuite isolés avec des revêtements haute performance tels que le polyimide spécialisé (Kapton/PI).CITCable extrude tous types de PEEK, PEI, polyimide, TPI, PI, FEP, PFA, PTFE, ETFE, PVDF, Viton/FKM/FPM, silicone et réalise des enroulements de PI, PTFE et autres. CITCable peut traiter aussi bien les câbles d'alimentation de grande section que les câbles de commande miniatures. Résistance aux radiations, aux hautes et basses températures, aux contraintes mécaniques extrêmes et à la miniaturisation, sous atmosphère standard ou inerte.Nous proposons des câbles ATF résistants aux fluides, notamment pour l'huile et le gaz. Si vous êtes intéressé par ce type de câbles, n'hésitez pas à nous contacter pour une consultation et obtenir plus d'informations. Caractéristiques 1. Excellentes propriétés mécaniques et résistance chimique.2. Excellente résistance aux fluides moteur à haute température3. Caractéristique d'amortissement de la résistance élevée à la déchirure et à la traction.4. Paroi mince résistante à l'huile chaude 200 °C, 240 °C5. Revêtement extérieur haute performance en PEEK, TPI, PEI, Téflon, silicone, fluoropolymère/Viton/FKM/FPM6. Haute température, haute performance
    EN SAVOIR PLUS
  • Capteur de température ultra basse, fil de cuivre phosphoreux PI
    CITCABLE fournit des câbles professionnels en Kapton (polyimide). Fil de revêtement Kapton/PEEK en bronze hosphor Cette série de fils haute performance utilise principalement du cuivre nu, étamé, argenté ou nickelé, de l'argent pur et des alliages spécialisés comme conducteurs de base, qui sont ensuite isolés avec des revêtements haute performance tels que le polyimide spécialisé (Kapton/PI).CITCable extrude tous types de PEEK, PEI, polyimide, TPI, PI, FEP, PFA, PTFE, ETFE, PVDF, Viton/FKM/FPM, silicone et réalise des enroulements de PI, PTFE et autres. CITCable peut traiter aussi bien les câbles d'alimentation de grande section que les câbles de commande miniatures. Résistance aux radiations, aux hautes et basses températures, aux contraintes mécaniques extrêmes et à la miniaturisation, sous atmosphère standard ou inerte.Nous proposons des câbles ATF résistants aux fluides, notamment pour l'huile et le gaz. Si vous êtes intéressé par ce type de câbles, n'hésitez pas à nous contacter pour une consultation et obtenir plus d'informations. Caractéristiques 1. Excellentes propriétés mécaniques et résistance chimique.2. Excellente résistance aux fluides moteur à haute température3. Caractéristique d'amortissement de la résistance élevée à la déchirure et à la traction.4. Paroi mince résistante à l'huile chaude 200 °C, 240 °C5. Revêtement extérieur haute performance en PEEK, TPI, PEI, Téflon, silicone, fluoropolymère/Viton/FKM/FPM6. Haute température, haute performance
    EN SAVOIR PLUS
  • Câble à fil isolé en polyimide 20AWG
    CITCABLE fournit des câbles professionnels en Kapton (polyimide).Câble isolé KaptonCette série de fils haute performance utilise principalement du cuivre nu, étamé, argenté ou nickelé, de l'argent pur et des alliages spécialisés comme conducteurs de base, qui sont ensuite isolés avec des revêtements haute performance tels que le polyimide spécialisé (Kapton/PI).CITCable extrude tous types de PEEK, PEI, polyimide, TPI, PI, FEP, PFA, PTFE, ETFE, PVDF, Viton/FKM/FPM, silicone et réalise des enroulements de PI, PTFE et autres. CITCable peut traiter aussi bien les câbles d'alimentation de grande section que les câbles de commande miniatures. Résistance aux radiations, aux hautes et basses températures, aux contraintes mécaniques extrêmes et à la miniaturisation, sous atmosphère standard ou inerte.Nous proposons des câbles ATF résistants aux fluides, notamment pour l'huile et le gaz. Si vous êtes intéressé par ce type de câbles, n'hésitez pas à nous contacter pour une consultation et obtenir plus d'informations. Caractéristiques 1. Excellentes propriétés mécaniques et résistance chimique.2. Excellente résistance aux fluides moteur à haute température3. Caractéristique d'amortissement de la résistance élevée à la déchirure et à la traction.4. Paroi mince résistante à l'huile chaude 200 °C, 240 °C5. Revêtement extérieur haute performance en PEEK, TPI, PEI, Téflon, silicone, fluoropolymère/Viton/FKM/FPM6. Haute température, haute performance
    EN SAVOIR PLUS
1 2 3 4 5 6
Un total de 6 pages

laisser un message

laisser un message
Si vous êtes intéressé par nos produits et souhaitez en savoir plus, veuillez laisser un message ici, nous vous répondrons dès que possible.
soumettre
CONTACTEZ-NOUS: sales@citcable.com

Maison

Produits

WhatsApp

Contactez-nous